Lightning Protection System Design
Lightning is a capricious, random and unpredictable event. Its’ physical characteristics include current levels sometimes in excess of 400 kA, temperatures to 50,000 degrees F., and speeds approaching one third the speed of light. Globally, some 2000 on-going thunderstorms cause about 100 lightning strikes to earth each second. USA insurance company information shows one homeowner’s damage claim for every 57 lightning strikes. Data about commercial, government, and industrial lightning-caused losses is not available.
Lightning is a capricious, random and unpredictable event. Its’ physical characteristics include current levels sometimes in excess of 400 kA, temperatures to 50,000 degrees F., and speeds approaching one third the speed of light. Globally, some 2000 on-going thunderstorms cause about 100 lightning strikes to earth each second. USA insurance company information shows one homeowner’s damage claim for every 57 lightning strikes. Data about commercial, government, and industrial lightning-caused losses is not available. Annually in the USA lightning causes more than 26,000 fires with damage to property (NLSI estimates) in excess of $5-6 billion.
The phenomenology of lightning strikes to earth, as presently understood, follows an approximate behavior:
- The downward Leaders from a thundercloud pulse towards earth seeking out active electrical ground targets.
- Ground-based objects (fences, trees, blades of grass, corners of buildings, people, lightning rods, etc., etc.) emit varying degrees of electric activity during this event. Upward Streamers are launched from some of these objects. A few tens of meters off the ground, a "collection zone" is established according to the intensified local electrical field.
- Some Leader(s) likely will connect with some Streamer(s). Then, the "switch" is closed and the current flows. We see lightning.
- Road cross-section & Piping plans/ drawings
The system design will include:
- Grounding systems design – a configuration should be designed as a result of soil resistivity analysis.
- Downconductor routes - chosen to avoid other services, maintain minimum bending radii of 20 cm (8 inches) or greater and minimize down conductor run length.
- ownconductor securing requirements.
- LPSD - CAD analysis design software which determines terminal placement, mast & height requirements as well as protection level calculation.
  
  
